[Abstract] Here to remind consumers to buy furniture before, it is best to prepare knowledge in advance, learn some tips to identify and identify all kinds of furniture. Here, the newspaper has collected 5 tips for purchasing, and hopes to help you. Charming glory furniture http://olfd.cnjiaju.com/ share.
The material structure should be reasonably different from the furniture, and the surface materials are different. For example, the legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while the internal materials can be used with other materials; the thickness of the legs of the large wardrobe is 2.5 cm, which is too thick and awkward. It is easy to bend and deform; kitchen and bathroom cabinets can't be made of fiberboard, but should be made of plywood, because the fiberboard will expand and damage when it meets water; the table should be washable.
If it is found that there are insect eyes and foam in the wood, it means that the drying is not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is squirting, glaring, or tearing, it means that the formaldehyde content in the glue is too high. It will have a harmful moisture content of about 10%. The moisture content of the furniture should not exceed 12%, and the moisture content is high. Wood is prone to warping and deformation. When the average consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the furniture or the place where there is no paint inside. If you feel the moisture, the moisture content is at least 50%, which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If the flooding is slow or not, it indicates a high moisture content.
The four feet are smooth and the foundation is flat. It is known that some furniture has only three legs to land. Take a look at whether the table is straight, without the bow or the waist; the table top is raised, the glass plate is placed on the table; the table is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be horizontal and vertical, and the door should not sag.
If the patchwork is tight, whether it is a veneer, a PVC or a pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is a drum, a blister, or a seam.
Look at the light when you check it, and don't see it when you don't. Ash veneer veneer veneer furniture is relatively easy to damage, generally only two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. The way to identify the two is to look at the pattern of the wood. The wood texture of the cut veneer is straight and dense, and the veneered veneer pattern is curved and sparse. Particleboard veneer furniture, the ground part must be edged, and the edge banding will absorb moisture, swell and damage. Generally, the corners of the veneer furniture are easy to be tilted up. When picking, you can use your hand to rub the corners. If you get up, you will have problems with the glue.
Accessories installed display technology check the door lock switch is not working; large cabinets should be equipped with 3 hidden hinges, and some can only be installed two; the top 3 screws, some cut corners, only one screw, use Will fall.
Guangzhou Shiruoni Cosmetics Co., Ltd. , https://www.shiruoni.com