Case maintenance
We maintain a watch mainly in three parts,including case, band and movement.Case material can be divided into basic 18K gold, gold, titanium alloy, stainless steel .The process is generally about drawing and polishing , and sometimes frosted grinding process.Some Advanced watches will be set diamond on the case, this noble case only maintained by a special watch center .And the general maintenance of the case is basically the continuation of its drawing and polishing, but only for the case on the small scratches, if it is caused by the dents, it is hardly to be repaired.
Everyone wants to do more maintenance when they see the obvious results,but to a certain extent, your watch will be lost as you do maintenance.Because the so-called polishing maintenance is simply to put the scratch out of the case in order to achieve the overall balance.
If your case is K gold, then I suggest you do not maintain so diligently, but we can do a maintenance when the more scratches appear in a one-time solution to reduce the overall wear and tear of the case.If only very small scratches, wipe with K gold cloth .
As for the gold-plated case, you just do more attention, wipe the dust with a soft cloth. the scratches on Gold-plated case are no way to do polishing repair, because the grinding to the scratches after the exposed is the steel.
Movement maintenance
Grease and dust from outside will go into the case from some gaps that why we need to do maintenance.
Movement maintenance includes cleaning and oiling.Cleaning requires the removal of all parts of the mechanical movement with a special cleaning solution to run the sludge in the process of cleaning, and other cleaning solution after the dry, point on the special table oil, re-assembly as the original intact, after repeated Detection and commissioning to ensure that the function of the watch after the same, the entire maintenance process to be considered
Band maintenance
Band is about steel strip, leather, between the gold belt and very little K gold strap.we mainly talk about the maintenance of steel strip and leather band, and the between the gold belt and very little K gold strap can follow those two.But remember, we must first remove the strap, do not attach the watch directly to do the clean, because it is to avoid the water during the water washed directly to the watch and watch flowing into .
If your watch is equipped with a strap, then prepare a soft toothbrush, a little toothpaste, a piece of cloth, a hair dryer.Toothpaste contains abrasive, abrasive ingredients, including calcium carbonate, calcium hydrogen phosphate, silica, aluminum hydroxide, etc., these substances are very small molecules, can be filled into the scratches of the strap, can play a certain repair effect.but if the dents caused by crashes,then they can not be repaired just like the case.
With a soft toothbrush stained with toothpaste, the strip inside and outside are brush it again, after brushing and then rinse off the water with water, and then dry with a dry cloth, the best blower cool breeze thoroughly blown the strap , To prevent moisture residue lead to surface oxidation.You can directly get the watch to professional watch repairing center, they will put your strap into a special ultrasonic cleaner cleaning, the effect of natural than their own to be clear, smooth as ever.
Thanks for your scanning and any question, pls feel free to contact me and browse our website.