There are many kinds of cases and bracelets, such as tungsten titanium alloy, high-tech ceramics, stainless steel, soft fiber, ordinary steel and so on. When wearing, should avoid friction or collision with hard objects. Regular cleaning of case and bracelet is also very important. In addition, seawater, salt water bath, perfume, shampoo, nail polish, nail polish and some chemicals containing chemicals, etc., all can corrode the plating of the watch and the metal surface, should avoid contact.
For the new watch, most of the bracelets are too long, or with the changes in the season, wearing the bracelet on the hand will sometimes loose sometimes tight. So, the take down the machine is nevessary tools for you.
First, please see the arrow carefully on the back of the barcelet before dismantle the barcelet (Figure 1).
Then, with arrows of the barcelet are detachable.
(Figure 1)
Second, loosen the handle of the tool, put the barcelet into the slot, and keep the tool`s needle with the pinhole of the barcelet, as shown in Figure 2, and the needle follows the direction of the arrow,at this time the handle of the tool is tightened inward, and the needle that connection the barcelet is ejected and then use the pliers to pull out the needle.
(Figure 2)
Please note:In the process of using the tool, be careful of the needle to scratch the bracelet, When the bracelet is fit for the size of the wrist, at this time need to connect the cut into two sections of the bracelet together, inserted into the needle fixed, the rest of the needle can be typed with hard material gently, the colloid is the best, can be better to avoid scratching the bracelet. After the needle knocked into the pinhole , and then use the tool to push the needle into the depths of the pinhole. This will be a perfect connection.
Tips: When connecting the bracelet, you must insert the needle in the opposite direction of the arrow.