AP600 sleeve labeler

With the development of the beverage market, beverage companies are all in need of modern, efficient equipment. Two years ago, the speed of filling equipment was about 24,000 bottles/hour. Now, the speed of filling equipment has reached 36,000 to 48,000 bottles/hour. The increase in the speed of the front-end equipment inevitably requires the rear-end equipment to follow, especially the need to increase the number of sets of labels. The speed of the device. In addition, the bottle design changes very much, more and more curve bottles, so the labeling equipment has received great attention, and more beverage companies began to choose the labeling equipment, and the shrink film cost is much lower than the labeling paper. It is more conducive to the promotion and application of sleeve labeling machinery. Some of the causes prompted the rapid development of the labeling equipment in the past one or two years.

Firstly, the speed of the labeling machine is required to speed up to accommodate the high-speed front stage. At present, the sleeve labeling machine uses a servo motor, multi-axis controllers, and computer integrated control to form a high-precision electronic control system, which enables the production speed of the labeling machine to be 400 bottles. Increase to 600-800 bottles/minute per minute to meet the speed requirement of the entire line. In addition, with the increase in the change in the bottle type and the speed of the production line, the shrinking method and the contraction effect of the sleeve labeler are required to be closely followed. With the increase of the shrinkage effect of the label, steam-type shrinkage is increasingly recognized by users. The steam shrinking nozzle of the steam shrinking furnace can be arbitrarily adjusted in direction to match the bottle curve to achieve the best shrinkage effect, and the shrinkage is smooth.

The AP600 of Taiwan's Li & Fung Machinery Co., Ltd. has a first-of-its-kind automated pick-up agency (optional) that greatly reduces labor intensity. The unique design of synchronous transmission mechanism, cutter knife cutter, proud of their peers. Use Japanese servomotors for high speed and excellent stability. At the same time with high-tech computer control, low failure rate, rapid maintenance.
Let us interpret the AP600's device features:
(1) Synchronous transmission machinery, a drive belt, and six sets of drive transmission standard axes, any drive belt replacement and maintenance can be completed within three minutes, compared with the traditional multi-layer boom replacement and maintenance more than six hours, easy maintenance, Simple maintenance does not affect production.
(2) Unique knife holder design in the country, suitable for <1) 30-middle 130mm containers, completely free of replacement of cutter holders, free from commissioning, leading similar products; new cutter design, flat cutting surface, more beautiful shrinkage,

(3) Modularization design, the host uses electric lift, fine-tuning parts of each fine-tuning area has a fine (0.02mm) fine-adjustment scale scale, adjust more quickly. It is guaranteed that the specification can be replaced in 10 minutes without the use of auxiliary tools.
(4) Double-shrink label feeding tray design, high degree of height; microcomputer self-working calculus, free setting, no adjustment, as long as a small press, the label that is self-study detection, self-positioning; change the mark is absolutely fast and easy, cut off The location is absolutely accurate.