Last year's "General Technical Conditions for Children's Furniture" put a "tightening spell" on the quality and safety of children's furniture. However, even today, when children's furniture is implemented more than a year, there are still many children's furniture that are accused of not meeting the requirements of the new national standard. Recently, the Shanghai Industrial and Commercial Bureau monitored the children's furniture in this city. The results showed that the unqualified rate of the products under surveillance reached 54.12%.
Key points: Recently, the Shanghai Municipal Administration of Industry and Commerce conducted quality monitoring on 24 batches of furniture such as cabinets, chairs and beds used by children aged 3-14 in the city. The results showed that 24 batches of children tested this time. In the furniture, a total of 13 batches were unqualified, and the failure rate was 54.12%. Among them, there are 8 batches with unsatisfactory structural safety performance.
Key points: In this monitoring of Shanghai, there are 4 batches of furniture panels whose four corners have not been rounded, or the rounding radius does not meet the national standards. There are 1 batch of furniture metal door handles with sharp edges at both ends. Before the Pacific Home Network visited Guangzhou's major furniture stores, I also saw children's furniture with sharp edges or chamfers at Yijia Home and Panyu Dashi Furniture City.
Key points: In this monitoring, the three-door cabinet of model type C is produced by Shanghai Dinghong Furniture Manufacturing Factory with the production date of 2013.3.18, and the nominal manufacturer is Foshan Nanhaisheng Royal Co., Ltd. Model No. 803, a two-door cabinet with a production date/lot number of 2012.10.20 was found to be inconsistent with the requirements of the new national standard for anti-pull (structure safety - other 4). Pacific Home Network has learned that children's furniture with the same problems is available in Guangzhou.
Key points: The new national standard requires that the push-pull parts such as drawers and keyboard holders in children's furniture products should have anti-pulling devices to prevent children from accidentally pulling off and causing injury; all high-table tables and cabinet products with a height greater than 600mm should provide fixed products. Connections on the building and instructions on how to use them in the instructions for use. At present, no matter whether it is Shanghai or Guangzhou, there are still non-standard products that do not have anti-lifting devices or fixed connectors. Faced with the mixed situation of children's furniture in the market, the Shanghai Industrial and Commercial Department advises consumers to give priority to product safety when purchasing children's furniture.
Polycarbonate (referred PC) is a polymer molecular chain containing a carbonate group, an ester group according to the structure can be divided into aliphatic, aromatic, aliphatic - aromatic and other types. Which due to the aliphatic and aliphatic - aromatic polycarbonate lower mechanical properties, thereby limiting its application in engineering terms. Currently, only the aromatic polycarbonate obtained industrial production. Due to the special nature of the polycarbonate structure, it has now become the top five fastest growing engineering plastics in general engineering plastics.
PC chairs made of plastic material and they have the same advantage.Clear Acrylic Chair, Acrylic Dining Chairs, Modern Acrylic Chairs, Siesta Crystal Chair
Taizhou Pinsum Furniture Co.,Ltd , http://www.pinsumchina.com