[ Chinese wardrobe network ] With the improvement of people's living standards, custom life has entered thousands of households, but there are still many people who accidentally walked into the size trap of custom wardrobes . Let's talk about custom wardrobes. Size traps and custom wardrobe purchase considerations.
Customized wardrobe purchase notes:
First, the planning of custom wardrobes should look after the special operators
For example, in general, the elderly have more clothes stacked, fewer pendants, and the clothes are not frequently washed. You can use more separate layers and drawers to remove less clothes, considering the inconvenience of the elderly. Factor, the commonly used drawer position should not be designed too low, should be up and down 90cm above the ground.
Second, carefully observe the hidden area, observe the internal quality of the custom closet
Observe the section of the sheet from some openings. Good plate cross-section color is uniform, and the color is light, the fiber is long and fine. The plate is almost the same, the black color is mixed in the white cross section, the color is deep, and the fiber is short and loose. The more tidy, smooth, dense and uniform the edge of the board, the finer the workmanship of the product; if the edge is rough, cocked, cracked, uneven, not only indicates that the product is rough, but also Easy to scratch clothing and skin.
Third, put a good installation gateway
The level of installation of the workers will also have a certain impact on the final state of the wardrobe. The owner needs to do more work after the worker is installed. For example, push and pull the drawer to see if the drawer is smooth and the gap is even; open and close the door, the installation is qualified, there should be no abnormal noise, the positioning is accurate, the gap between the two sides is even; the horizontal plane of the wardrobe should be flat The façade of all should be vertical; the damper drawers, sliding doors, etc. should be pushed and pulled smoothly, not slipping back and forth, and wherever the hand is pushed, it is probably stopped.
Fourth, hardware accessories are very important
Door Hinges and drawer rails are the two most important hardware accessories in the wardrobe, and their quality largely determines the durability of the wardrobe. The hardware components used in good overall wardrobes are mostly well-known brands, and such hardware accessories are printed with anti-counterfeiting marks. The use of high-quality hardware accessories can extend the service life of all wardrobes; and inferior hardware accessories can not only ensure their longevity, repeated replacement may also lead to the wardrobe can not be used normally.
Custom wardrobe size traps:
Trap one: custom wardrobe exposed size does not match
Some citizens have responded that the length, size and contract of his custom-made wardrobes are quite different. Designers will not make mistakes in this basic thing. Obviously they intend to do so. When I find the business to go to the theory, the merchant once refused to admit that it was his own problem and refused to admit the mistake to the consumer. They think that consumers don't understand, confuse and deceive consumers' trust.
Trap 2: Many sizes of money
Coincidentally, a consumer who ordered a wardrobe in Wuhan also encountered similar situations. “I ordered a whole wardrobe on October 14, 2012, and signed a contract. The original design size and actuality due to the designer’s work mistakes. With an error of 200 mm (designed as 400 mm), the already formed cabinet could not be installed in my house and had to be cancelled."
An industry insider bluntly said that the size of the customer is much larger, and it is not excluded that the designer has ulterior motives. A lot of size and more money, is a trap for custom wardrobes. "The size of the wardrobe is wrong, which is a common problem encountered in the design, production and installation of the wardrobe company, but this can be avoided. An error rate is set inside the enterprise, generally the error length does not exceed 2 cm. Beyond this range, It’s the designer’s problem.â€
It is understood that the designer's design is also calculated according to the commission. Who designed the cabinet, the order is more, and the commission is more. Maybe some designers build their own happiness on the consumer in order to get more commissions, and design more and more to get more money.
The above is the knowledge to tell everyone, I hope to help everyone.
Furniture And Cabinet Fittings
Cabinet Lift Support,Sliding Door Pulley,Cabinet Door Lift Support,Furniture And Cabinet Fittings
Wenzhou Zhaoxia Hardware Co.,Ltd , https://www.zhaoxiahardware.com