[ China Wardrobe ] In life, there may be many friends who want to build their own wall-mounted overall wardrobe but don't know where to start. Today Xiaobian teaches you to use the following three tricks to create a perfect in-wall overall Wardrobe :
Environmental protection is very important
In addition to being closely aligned with the wall, environmental protection is of course important. According to experts, you can feel the internal quality of the whole wardrobe from some hidden places. For example, observe the cross section of the plate from some openings. The cross section of the good plate is uniform and the color is light. The fiber is long and dense, and the plate section is almost the same. The white color is mixed with black impurities, the color is deep, the fiber is short and loose; the flattening, smooth, dense and uniform of the sealing edge of the board proves that the finer the workmanship of the product, on the contrary, the edge banding appears rough, cocked, cracked, Concave and concave, etc., not only indicates that the product is rough and easy to scratch clothes or skin when used; the hardware accessories used in good wardrobes are also hardware accessories of well-known brands, and more anti-counterfeiting marks are printed. High-quality hardware accessories can significantly extend the service life of the wardrobe, while quality hardware accessories can not only guarantee the service life. Repeated replacement may cause the whole wardrobe to be unable to be used normally. In addition, some humanized design will make consumers use it. Benefit from the process.
The silent design of the slide rails and pulleys can make people switch to the sliding door type wardrobe without affecting the person who is resting; the hinged hinges, pulleys, slide rails, crash pads, etc. can avoid the collision between the wardrobe door and the edge of the wardrobe. Extend the service life; the addition of moisture-proof plug can not only improve the moisture-proof effect of the wardrobe, but also reduce the emission of harmful substances in the substrate; the addition of the sealing strip improves the sealing of the wardrobe and facilitates cleaning.
First decoration, resize
Xiaobian reminds consumers: to make a wall-mounted overall wardrobe, must be measured after the completion of the renovation.
Nowadays, many families have appeared in the wall hole reserved by the developer whether to place a customized whole wardrobe or buy a finished wardrobe. In fact, these two methods can be used, but the wardrobe cabinets that are to be topped are considered to be non-standard cabinets at many overall furniture manufacturers, and the charges are relatively high. However, for enterprises with a very high degree of computer numerical control, the production of non-standard sizes is in no way different from the standard size.
The wall of the fortress cabinet must be horizontal and vertical so that it can be tightly seamed with the cabinet. Therefore, it is best to ask the workers to shave all the sides of the wall vertically and evenly; after the floor and wall paint are all completed, the cabinets must be re-stocked. Size is required to prevent the difference; to measure from top to bottom, take the minimum value as the size of the cabinet; install it first and then assemble it outside, then push it into the wall. If the wall has more deviations, it is more difficult to adjust, and it can be beautified by adding a baffle on the side.
The top of the whole wardrobe is easily deformed
Under normal circumstances, the wardrobe cabinet provided by the furniture manufacturer will not exceed 2.4 meters, but the height of most consumers' homes is about 2.6 meters to 2.7 meters. The deformation of the wardrobe cabinet has to be considered.
Many manufacturers tell consumers when they do the whole wardrobe, they must be divided into two sections, in order to prevent deformation. In fact, this statement is not accurate, it is likely that they do not have such a large panel. The most common sheet length in the industry is now about 2.44 meters, beyond which it is impossible to use the entire board. However, some of the brand-customized panels have ultra-large panels, which can achieve the overall effect of the ultra-high cabinet, stability and aesthetics. At the same time, if the cabinet is too high, the door will become heavier, so the hardware such as hinges is very important. Consumers must not be taken lightly in the choice of hardware, otherwise it is prone to danger.
CREATE WORKSPACES THAT WILL ADAPT AND EVOLVE WITH CHANGE
With the Modern benching system, create defined spaces to support various types of work interactions for a coordinated look across the office. Easily expand existing workspaces or build in privacy with elements such as fabric screens, glass and storage. Seamlessly connect everyone at the bench with power and data running discreetly underneath the surface. Create a well-balanced open office with Modern benching, available with the new Walnut worksurface and Cloud White finish.
Benching Workstation,Modern Office Desk,Office Furniture Workstation,Wooden Workstation Office Desk
Cubespace Corporation Limited , https://www.cubespacefurniture.com