Note the following when using the woodworking engraving machine:
1. The continuous operation time of the woodworking engraving machine is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be dehydrated. The cooling water should be replaced regularly to prevent the water temperature from being too high and the circulating water as much as possible. , you can change the large capacity water tank.
2, woodworking engraving machine every time the machine is used, pay attention to cleaning, be sure to clean the dust on the platform and transmission system, regular (weekly) lubrication of the transmission system (XYZ three-axis).
3. If the woodworking engraving machine is not used for a long time, it should be refueled regularly (weekly) to ensure the flexibility of the transmission system.
4. The woodworking engraving machine regularly cleans the dust inside the electrical box according to the usage conditions, and checks whether the screw of the terminal is loose to ensure the safe and reliable use of the circuit.
5. The woodworking engraving machine regularly checks (depending on the use) whether the screws of the various parts of the machine are loose.
3 Ply Tissue,Face Clean Tissue,Soft Facial Tissue,Facial Tissue Paper
Yafeng Paper Industry Co., Ltd , https://www.tenoutissue.com