Three advantages of SmartLase equipment meet the actual needs of users

In addition to the flexibility and variety of coding methods, many end-user companies favor dot-matrix coding because of their high reliability, high production efficiency, and low cost.

Marken’s SmartLase devices use patented dot matrix resident technology to reduce the energy required to improve reliability and reduce procurement and operating costs by using laser energy efficiently.

The principle that the SmartLase device can make the laser more stable is that, during the entire coding process, the dot matrix resident technology enables the laser to make a series of digital ones to open and close only one time, unlike the vector-based coding technology. The laser will open and close once for each character. This is like a light bulb, if you repeatedly switch and repeat this action at high frequency, then the service life of the light bulb must be shortened, that is to say, the stability of the use of the light bulb with more switches is worse. Obviously, the reliability of the SmartLase device supported by dot matrix resident technology fully meets the user's maximum demand for identification devices.

In addition, SmartLase equipment has a very clear advantage in reducing the user's production costs.

People who know about laser coders know that low-power devices exhibit excellent stability due to the low temperature of their laser tubes at work, and that air-cooled heat dissipation can achieve excellent results (due to stability and laser machines). The level of heat dissipation is relevant, and there is a clear advantage in the loss of energy. The only insufficiency is relatively slow. However, to achieve relatively fast code speeds, users must purchase high-power laser marking devices at higher prices, which will undoubtedly increase cost investment for end-user companies. So how does the 10 watt dot matrix laser from Marken's SmartLase machine achieve the code speed of a 25 watt, 30 watt sculpting laser?

We can demonstrate this reality by experimentation: through experiments, we have reached the following conclusion: At a power of 10 watts, a dot-matrix laser adopts a 7*5 dot matrix format with a speed of 253 feet/minute (approximately 60 meters/minute). The scoring laser machine speed is 91 feet per minute. Only when the power reached 30 watts, the scoring laser machine speed was 273 feet. The principle is: each point requires energy during the characterization, completely characterization of the trajectory of the character, the energy consumed by it is bound to increase, and the use of dot-matrix type to play the important point of the character trajectory, so the energy required small. Therefore, under the condition that the same mark can achieve a clear, permanent, and beautiful mark, the advantages of dot matrix code printing in stabilizing the coding machine are obvious.

Laser coders have a wide range of applications, many applications, rely on its no need for consumables, high reliability code, permanent marking, high efficiency, low maintenance, non-contact and many Other advantages. It will surely occupy a broader market space more quickly. By then, Marken and its SmartLase equipment will provide targeted technical support for more users, so that the dot matrix laser coder will better serve the market and users.