Quality of Label Flexo Operators

In the label flexo, the human factor is also critical. Operators should mainly have the following qualities.

1. High degree of responsibility. Responsibility is the first, and if you don't have the responsibility to talk about anything, it's a loss.

2. Have a certain understanding of mechanical principles and electrical knowledge. When operating the flexographic printer, the mechanical and electrical characteristics of the printer can be fully taken into consideration to avoid unnecessary waste in printing, and to eliminate some problems existing in the printing press.

3. Have a certain basis of chemical knowledge. In the adjustment of the ink can be considered from the physical and chemical angle, so that the ink to achieve the best results.

4. Master all kinds of printing processes. Only by mastering the various printing processes, can we feedback some problems on the design in time so that the label design is suitable for flexographic printing as much as possible, thus saving raw and auxiliary materials and avoiding waste.

5. Be good at summing up. Only by summarizing and refining the problems that arise in the printing in a timely manner can one's own ability be continuously improved.

Flexographic printing is favored by packaging and printing manufacturers because of its features of environmental protection, colorfulness, and stability. The proportion of label printing is also growing. Therefore, how to display its characteristics is becoming a major issue for flexo printers. A subject. It is believed that flexo will occupy a more important position in label printing under the premise that the country vigorously advocates environmental protection.